| Speaker is known as an electronic device which can | | | | entire audio and also pay close attention to the |
| translate the digital signals that sent from the sound | | | | nuances in the music. You have to make sure that the |
| producing device into the audible sound waves. | | | | high parts are clear, crisp, and without distortion. |
| Speaker also becomes a vital part of recording | | | | Meanwhile, the lower parts must be deep and also |
| process in studio, which can give the artists and | | | | resonant. During this process, you should close your |
| engineers the constant feedback that required for | | | | eyes to imagine and try the sound as a live |
| hearing what the product is going to sound like. It is | | | | performance. A good studio speaker must be faithful |
| very important to calibrate and test the speaker in the | | | | for the live sound. |
| studio so that it can accurately reflect what the audio | | | | The third thing that you have to do is to load the |
| is going to sound like when it is played outside of the | | | | speaker test on the computer. After that, you can |
| studio. At this time, this article is going to give you | | | | start to play low frequency like 10Hz and try to listen |
| some easy tips to test studio speaker. So, just follow | | | | for the clarity. It must exist more as the deep rumbling |
| some tips below. | | | | than the audible noise. |
| The first thing that you have to do is to launch the | | | | Lastly, you can try to play high frequency sound such |
| audio file on the studio computer. It will be preferably | | | | as 15 kHz. The sound must be clean and without the |
| the raw audio recording in the digital audio program. | | | | unintended noise like static that comes from the |
| The second thing that you need to do is to listen to the | | | | speaker. |