| One advantage of thermal CTP technology | | | | materials, manpower and working hours;save the film |
| 1. High-quality (1) through the digital imaging plate can be | | | | and film developing and fixing solution and punching |
| printed version than analog imaging technology (CTF) | | | | machine investment;page less waste, reducing the ink, |
| more clearly sharpening the dot, dot shape and size of | | | | fountain solution and paper consumption;reduce the |
| a closer and more sophisticated, can 300lpi screen | | | | manual process of repairing, or burn out long standby |
| lines down by 1% ~ 99% dot, dot can be as small as a | | | | caused by improved post-printing equipment and |
| few microns in diameter, the edge is very straight, very | | | | printing equipment utilization;contribute to management, |
| flat surface, you can optimize ink transfer. | | | | prepress, printing and finishing process of digital |
| (2) can achieve more accurate plate registration. | | | | workflow (CIP3/CIP4), so that the whole work flow |
| (3) there is no dust, film after the exposure such as | | | | faster and more efficient. |
| knife handling. | | | | 4. High resistance to Indian forces |
| (4) can use the FM network. FM screening to improve | | | | Thermal plate easy to wear, sustainable use for a long |
| the Print Product quality and improve the effect on | | | | time. After drying version, anti-Indian forces could reach |
| Mexico plays an important role. FM screening can | | | | 100 million to 2 million and India. |
| produce a higher density, more smooth, level, more | | | | II thermal CTP inadequate Thermal imaging technology |
| stable tone mesh, and affect the machine's network | | | | has shortcomings, generally speaking the higher |
| gain; FM screening moire difficult to form, so you can | | | | prices.higher prices of thermal plates, thermal plates on |
| use more ink to print. Collection of small outlets than a | | | | the market price higher than the visible light imaging |
| large network has a longer side, the edge of the | | | | plate, PS plate than the traditional offset printing is |
| network would exceed the edge of the accumulation | | | | more expensive;exposure thermal plates require more |
| of ink, so FM than AM screening net increase of | | | | energy than visible light exposure needed for plate to |
| network gain. | | | | be large;thermal system is also relatively high prices. |
| (5) reproduction of a greater tone range (better able to | | | | Short, thermal imaging technology for many years, |
| reproduce the bright tones and shadow detail). | | | | thermal CTP technology maturity and stability has |
| (6) smaller dot gain and more thick printing ink layer. | | | | been accepted by the industry. Although the thermal |
| 2. High aging through digital Chemical industry For | | | | CTP market is relatively stable, but there are many |
| processes to shorten the time of printing preparation | | | | variables in the market a lot of thermal CTP and the |
| phase;revised version does not exist, apart from dirty | | | | CTP violet laser movements. |
| process;set by faster digital printer calibration;shorter | | | | Highlights the essence of all in 2009, "China Industry |
| match time for ink (ink preset);more realistic (shorter | | | | News Daquan? |
| lead time). 3. Low-cost digital workflow can save | | | | |